Mohave II – Colorado River Steamship

Mohave II (also referred to as Mohave) was a stern-wheel steamboat and the largest vessel ever to operate on the Colorado River. It was the first and only double-smokestack (twin-stack) steamboat on the river, giving it a distinctive silhouette that resembled the larger, more ornate Mississippi River packets in outward appearance, though its interior was utilitarian and geared toward practical freight and passenger work rather than luxury.

Mohave II at Yuma, Arizona, with Sunday school group embarked, 1876 - Unknown author - MacMullen, Jerry, Paddle-Wheel Days in California, Stanford University Press, 1944
Mohave II at Yuma, Arizona, with Sunday school group embarked, 1876 – Unknown author – MacMullen, Jerry, Paddle-Wheel Days in California, Stanford University Press, 1944

Physical Description and Design

Built by San Francisco shipbuilder Patrick Henry Tiernan (the same builder of the earlier Gila), the Mohave II was constructed in sections in San Francisco, disassembled, shipped to the Colorado River Delta, and reassembled at the shipyard in Port Isabel, Sonora, Mexico (at the mouth of the Colorado River). It was launched in May 1876.

Key specifications included:

  • Displacement/tonnage: 188 tons.
  • Length: 149.5 feet.
  • Beam (width): 31.5 feet.
  • Draft: Approximately 1 foot (12 inches) of water—shallower than the Gila by about half a foot—which allowed it to navigate farther into shallow sloughs, sandbars, and low-water conditions than most other boats on the river.
  • Hull depth: Roughly 3–3.1 feet.
  • Propulsion: Stern-wheel paddle design, optimized for the Colorado’s shallow, shifting, sandbar-filled waters and strong currents.
  • Distinctive features: Twin smokestacks (the only such configuration on the river), contributing to its “palatial” or “magnificent” advertising image for excursions.

Despite its imposing external look, it was primarily a working vessel designed to tow barges and carry substantial cargo while also accommodating passengers for both commercial and recreational trips. Its shallow draft made it especially versatile for the challenging lower Colorado River environment.

History of Usage

The Mohave II was built by the Colorado Steam Navigation Company (C.S.N.C., formerly George A. Johnson & Company) specifically to replace the worn-out Mohave I (a 1864 stern-wheeler that had been dismantled in 1875 at Port Isabel, with its machinery later reused elsewhere). It entered service in 1876 and operated for about a quarter-century until around 1900.

It served as a key freight, passenger, and towboat during the peak and gradual decline of Colorado River steamboating. Primary roles included:

  • Hauling ore, mining machinery, supplies, wool, and other goods to support mining booms (including later gold discoveries in areas like the Searchlight and Goldroad districts) and agricultural trade in the American Southwest.
  • Transporting troops, merchants, settlers, and tourists.
  • Towing barges (sometimes multiple) for heavier loads.
  • Supporting railroad construction, notably assisting with the wooden railroad bridge at Needles in the early 1880s by towing barges equipped with pile drivers.
  • Special excursion and pleasure trips, including Sunday school outings (famously photographed at Yuma in 1876), May Day and Fourth of July picnics, trips to islands or points of interest, and even longer voyages into the Gulf of California (one noted 10-day pleasure trip in 1895 under Captain Jack Mellon).

Notable captains and operators associated with it included Isaac Polhamus (and family members), Joseph H. Godfrey (nephew of Polhamus, who took it to its farthest recorded point), and John Alexander “Jack” Mellon. Under Godfrey in 1881, it reached Rioville (at the mouth of the Virgin River in Nevada), the practical highest point of steam navigation on the lower Colorado during high water—extending roughly 450–600 miles upstream depending on conditions and measurement from the mouth or Yuma.

The boat helped sustain the C.S.N.C.’s dominance on the river even as railroads began encroaching in the late 1870s–1880s (the company was eventually linked to or sold interests involving the Southern Pacific). Business fluctuated with mining activity; a late-1890s revival kept the Mohave II and Gila busy enough that a new barge (Enterprise) was needed. By the late 1890s, however, rail competition and aging vessels reduced operations. In early 1900, as the company shifted resources (reusing the Gila’s engine for the new Cochan to serve Searchlight mines), the Mohave II was stripped of its machinery, run into Jaeger’s Slough near Yuma, and left to decay (dismantled around January 1900). Broader Colorado River steamboating effectively ended with the completion of Laguna Dam (about 14 miles above Yuma) in 1909, which blocked upstream navigation.

Ports of Call and Routes

The Mohave II operated primarily on the lower Colorado River, with Yuma (Arizona Territory/Arizona; formerly Arizona City, near Fort Yuma) as the principal hub and supply center after the railroad reached it. Standard commercial runs covered roughly 450 miles or more upstream during suitable water levels, connecting the Gulf of California/delta region to upriver mining, military, and settlement points. Wood yards and landings along the route supplied fuel (often cut by local Cocopah and other Indigenous workers).

Key ports of call and landings associated with its service and the broader C.S.N.C. fleet (which it shared routes with) included, from downstream to upstream (approximate historical distances and activity periods where noted):

  • Delta/estuary area (Sonora and Baja California, Mexico): Port Isabel (shipyard and major anchorage/port until the late 1870s), Robinson’s Landing, Port Famine, Lerdo Landing, Gridiron, Ogden’s Landing, and others for cargo transfer from ocean vessels (to minimize Mexican customs issues) and wood.
  • Lower river near Yuma: Jaeger City/Colorado City area, Fort Yuma/Yuma (core hub for passengers, freight, military supply, and excursions).
  • Mid-river Arizona/California points: Castle Dome Landing, Picacho, Ehrenberg (important mining/freight transfer), La Paz area, Parker’s Landing/Camp Colorado, Liverpool Landing, and others serving ranches, mines, and ferries.
  • Upper mid-river: Needles (California; grew in importance with the railroad and bridge construction in the 1880s, where Mohave II assisted), Fort Mohave (Arizona Territory; major military post and regular stop), Hardyville (Arizona Territory; practical head of navigation at low water, near present-day Bullhead City area; key ferry and freight point), El Dorado Canyon (Nevada; silver mining support), and Mohave City.
  • Farthest reaches (high water): Rioville (Nevada, mouth of the Virgin River; reached in 1881), with occasional service toward Callville or related Mormon supply points earlier in the steamboat era.

Routes typically ran between the Gulf/delta or Yuma and Hardyville/Fort Mohave as the practical limit under normal conditions, with extensions farther north in high water. Downstream trips were much faster than upstream ones due to the current. The boat also made special recreational runs from Yuma or Needles to nearby points of interest or into the Gulf.

Overall, the Mohave II exemplified the height of Colorado River steamboating technology and commerce in the late 19th century—bridging the pre-railroad era of isolated desert Southwest settlement, mining, and military supply with the transition to rail dominance—while providing both essential transport and occasional community recreation on one of the West’s most difficult rivers.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.